EasyManua.ls Logo

Philips EasyKey 3000 Series - How to replace batteries

Philips EasyKey 3000 Series
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
How to replace batteries
The working power of the door lock is a
4200mA/h lithium battery.
The battery cabinet is located at the
upper end of the inside escutcheon. You
can slide the battery cover upwards and
remove the cover to replace the battery.
Slide up to open the
battery cover
Battery cover buckle
How to charge the batteries
When the battery voltage is insucient,
and the door cannot be opened from
the outside, you can power up the lock
through the Micro USB interface by
using a 5V power bank as an external
power supply. After opening the door
lock, please replace the batteries
immediately.
1. The warranty period for the Li-ion battery
is 1 year.
2. The charging voltage is 5V.
3. When the network in the use environment
is unstable, it will accelerate the battery’s
power consumption.
Attention

Related product manuals