Philips EasyKey 7300 - Pre-Installation Instructions

5
Pre-installation instructions
Step 1 | Check the door opening direction
This product can be installed on doors of 4 types of opening directions:
left-out pull, right-in push, right-out pull and left-in push.
Left-in
push
Right-
in push
Indoor Indoor
Indoor Indoor
Outdoor
Outdoor
Outdoor Outdoor
Left-
out pull
Right-
out pull
Left-handle open Right-handle open
Step 2 | Change the handle direction
Unscrew the
screws and remove
the direction
adjustment stand.
1
Rotate the handle
to 180 degrees for
optimal placement.
2
Adjust the cable to
the specic place,
put the direction
adjustment stand
back and then
tighten the screws.
3
Unscrew the screws.
1
Rotate the handle
to 180 degrees for
optimal placement.
2
Tighten the screws.
3