Philips EasyKey Alpha Series User Manual

18
Push
1
2
3
Deadlock from inside
After the door is locked, long press the
[CLOSE] button. The button will ash
once in red and there will be a voice
prompt of “Inside deadlock enabled”.
Under inside deadlock mode, all functions of the
outside escutcheon will be locked. If you try to wake
up the system manually, the keypad area will display
the combination of “15937(X)” and there will be a
voice prompt of “Inside deadlock enabled” reminding
you that the door has been dead locked from inside.
Under deadlock mode, all operations of the outside
escutcheon are disabled. Only Master PIN code
verication or mechanical key opening is required
to release the door from deadlock mode.
Attention
Mechanical key opening
Cut the mechanical
key box and take out
the key shell. Push
the cover aside and
reveal the key itself.
Insert the key into
the key hole and
keep the key and key
shell vertical to each
other. Rotate the key
shell towards the
handle for 90° until
it becomes close to
the door surface.
Rotate the key shell
downwards for
180° to make the
key shell parallel
to the ground.
Then rotate the key
shell horizontally
towards the handle
to unlock the door.
We suggest that you do not use the mechanical key for daily unlocking. Use
the key only for emergencies, for example when the battery is dead, when
the PIN code is forgotten, or when the system fails to work properly.
Attention

Philips EasyKey Alpha Series Specifications

General

Brand	Philips
Model	EasyKey Alpha Series
Category	Door locks
Language	English