Philips EasyKey Alpha-VP-5HWS - Page 15

13
Download ocial App
Please search and download Philips
EasyKey Plus on your phone.
Lock intergration
Option 1: QR code scanning
1. Power on your door lock and nd the
QR code placed on the battery cover.
2. Sign in ocial app and choose "Add
a device" on the rst screen to enter QR
code scanning page.
3. After scanning the QR code on
the battery cover, please follow the
instructions to complete the pairing set
up in the app.
Option 2: Manual operations
1. Sign in ocial app and tap "Add a
device" in the rst screen and choose
"Manual".
2. Perform a search for product model
on current page and then go to network
connection page.
3. Enter [*] twice on the door lock, then
enter master PIN code and conrm with
[#] to go to master mode. Enter [4] to
join a network and you will hear a voice
prompt of "Connecting, please wait a
moment".
Return to ocial app and follow the
instructions to complete the pairing set
up .
Network setting
App pairing guide
The infrared sensor turns on by default.
Philips Easykey is only compatible with a
router with dedicated 2.4 Hz (5G Hz Wi-
Fi is not supported). Please make sure the
distance between the door lock and the
router is less than 10 meters, otherwise
the connectivity of the router will be
aected.
Attention
Attention
节能设置
节能设置
Infrared sensor
Network connection
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [*] twice followed by master PIN code
and conrm with [#].
Enter [4] to join a network. After a
successful network connection, the system
will automatically exit the master mode.
Enter [2] to go to system settings and then
enter [5] to enable or disable the infrared
sensor. Once heard a voice prompt of
"Succeeded", keep pressing [*] until you
nally exit the master mode.
①
②
③