Page 55 E
VERFLO
TM
SERVICE & TECHNICAL INFORMATION 1039055, VER. 06
8.9 MAIN PCA REPLACEMENT
Reference Table for Original and New Release Parts, Listed by Model Number
Number w/o
Purge Valve
Unit w/
Purge Valve
Unit w/o
Purge Valve
Unit w/
Purge Valve
Unit w/o
Purge Valve
To remove the Main PCA
1.
Remove the Filter Cover. Refer to the Filter Cover Replacement section for more information.
2.
Remove the Inlet Filter. Refer to the Inlet Filter Replacement section for more information.
3.
Remove the Rear Cabinet. Refer to the Rear Cabinet/Power Cord Replacement section for more
information.
4.
Unclip the Main PCA shield from the locking tab on the Front Cabinet. Refer to Figure 8-7.