Page 65 E
VERFLO
TM
SERVICE & TECHNICAL INFORMATION 1039055, VER. 06
5.
Torque specifications for the pilot valves are 1.5 in-LBS or 1.7 cm-KG. (T6 TORX size bit.) as
shown below.
6.
Install the Sieve Canister Assembly. Refer to the Sieve Canister Assembly Replacement section
for more information.
7.
Install the Rear Cabinet. Refer to the Rear Cabinet/Power Cord Replacement section for more
information.
8.
Install the Inlet Filter. Refer to the Inlet Filter Replacement section for more information.
To Next Page
Loading...
