EasyManua.ls Logo

Philips HDR3800 - Page 19

Philips HDR3800
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 19
English
Connect
Connect to VCR or similar device
You can record from a video tape to a
recordable DVD or use the VCR when the
recorder is turned off.
VIDEO
IN
IN
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
TV OUT
TV IN
TO VCR/SAT
EXT2
TV IN
1 Connect a scart cable (not supplied) from
the EXT2 TO VCR/SAT scart socket and
to the scart output socket on the device.
To view the video input, press HOME
and select [ EXT2 ], then press OK.
Notes
Your recorder replaces the VCR for all your
recording needs. Just unplug all the connections to
your VCR.
Most commercial video tapes and DVDs are copy-
protected and cannot be recorded.
Connect to digital video/digital 8
camcorder
DV OUT
DV-IN
1 Flip down the cover on the right hand
corner of this recorder.
2 Connect an i.LINK 4-pin cable (not
supplied) from the DV-IN socket on the
front panel to the DV OUT socket on the
camcorder.
To view the video input, press HOME
and select [ DV-IN ], then press OK.
Note
It is not possible to record or copy the titles or les
from this recorder to your camcorder.
Tip
This connection provides the best picture quality.
hdr3800_31_eng_29522.indd 19hdr3800_31_eng_29522.indd 19 2008-07-18 11:46:04 AM2008-07-18 11:46:04 AM

Related product manuals