20 EN
Connect to an analogue camcorder
VIDEO OUT AUDIO OUT
1 Connect a video cable (yellow - not
supplied) from the CVBS IN socket and to
the S-VHS or video output socket on the
camcorder.
2 Connect the audio cable (not supplied)
from the AUDIO IN sockets and to the
audio output sockets on the camcorder.
To view the video input, press HOME
and select [ EXT3 ], then press OK.
Tip
To record from this device, see chapter “Record
from other devices”.
•
•
Connect to a USB device or digital
camera
1 Flip down the cover on the right hand
corner of this recorder.
2 Connect a USB device or digital camera to
the
USB socket.
To view the content, press USB.
Note
The USB socket does not support a USB hub device.
Only digital cameras which support USB Mass
Storage Device class standard are supported.
•
Tips
You can copy media fi les (e.g. jpeg fi les) from the
recorder to your USB device.
To view the contents of the connected USB device,
see chapter “Play – Play from USB”.
•
•
•
hdr3800_31_eng_29522.indd 20hdr3800_31_eng_29522.indd 20 2008-07-18 11:46:04 AM2008-07-18 11:46:04 AM
To Next Page
Loading...
