38 EN
To change the default record settings:
Action Button
[ Frequency ] : Select the
repeat recording setting
(Once, Weekly, Mon~Fri,
Weekend).
(Red button)
[ Media ] : Select the
destination for recording
(HDD or DVD).
(Green button)
[ Mode ] : Select the
recording quality.
[ HQ ] ~ [ SLP ] – See
chapter ‘Before you
record – Select the
recording quality’.
•
(Yellow
button)
7 To exit, press GUIDE Plus+.
The ‘X’ icon lights up on the display
panel if a timer recording is set.
Note
If the recorder is not in standby mode, a notifi cation
message appears before the timer recording begins.
If you ignore the message, the recorder automatically
switches to standby mode. Recording begins at the
scheduled time.
‘VPS’ (Video Programming System) or ‘PDC’
(Programme Delivery Control) is used to control
the start and duration of TV channel recordings. If a
TV programme starts earlier or ends later than was
scheduled, this recorder will then turn on and off at
the correct time.
•
•
Schedule a manual recording
1 Press GUIDE Plus+.
2 Press the Blue button [ Home ].
3 Press S, then press X to select [ Schedule ].
Manual Home
ShowView
No programmes
4 Press the Green button [ Manual ].
The timer entry screen is displayed.
Home
Back Next
Please enter the recording date and press the green
button to conrm.
0 1 - Jan
No Programmes Media Freq. Mode
Once SP
HDD
5 Follow the instructions on the screen and
enter the recording information (date, start
time, end time) and press the Green
button [ Next ] to confi rm each entry.
hdr3800_31_eng_29522.indd 38hdr3800_31_eng_29522.indd 38 2008-07-18 11:46:10 AM2008-07-18 11:46:10 AM
To Next Page
Loading...
