Philips HDT8520 - Frequently Asked Questions

37Frequentlyaskedquestions
ENGLISH
Accessories
• Remotecontrol
Protocol:RC6
• Batteries:2x1.5VtypeAAA/R03
• Usermanual
• QSG
• Freeviewyer
• Retuneyer
• CoaxialRFcable
• HDMIcable
• AC/DCconverterincl.mainscord
Miscellaneous
• Temperaturerange(°C)
 Operating+5°Cto+45°C
 Storage-25°Cto+70°C
• Mains:AC230V+/-10%,50Hz
• Powerconsumption:<15W
 Standby:<0.4W
• Weight:
 Product:1.75Kg
     Includingpackaging:2.7Kg
• Dimensions:
 Product(mm)240x210x65
 Packaging(mm)360x290x100
Duetocontinuedimprovements,this
informationissubjecttochangewithoutnotice.
10 Frequently asked questions
Connection
Your HD recorder does not display any
digital TV channels on your TV. You may
also see the on-screen message “Signal
lost”.
• Checkthattheaerialcablefromtheaerial
wallsocketiscorrectlyconnectedtoyour
HDrecorder(seepage11).
• Theremaybeatemporaryproblemwith
thereception,caused,forexample,bybad
weather;tryagainlater.
• Checkifthereisanynetworkmessage
relatedtothissignalloss.Youcanaccessthe
Network messages menufromMenu >
Settings > Network messages.
The time-shift bar with “Live” indication
appears when you try to change a
programme.
Repeattheprogrammechangerequesttowatch
the programme.
Setup
Your HD recorder does not seem to be
working and there are no lights on the
front panel.
Checkthatthe12Vpowersupplyunit is
correctlyconnectedtoyourHDrecorder.
Your HD recorder does not seem to be
working and a channel number is shown
on the front-panel display.
• Checkthatallconnectionsareproperly
made(seepage11).
• CheckthatyourTVispluggedintothemains
andthatitisswitchedon.
• Checkthatyouhaveselectedthecorrect
A/Vchannel/sourceonyourTVdepending
onhowyourHDrecorderisconnectedto
it(thatis,usingHDMIorSCART).Referto
yourTV’susermanualforinstructions.