Philips HU5930 - Cleaning; Cleaning the water tank, water tray and NanoCloud rotary humidification wick

10 EN
Cleaning the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air outlet with a soft dry
cloth.
Cleaning the water
tank, water tray and
NanoCloud rotary
humidication wick
Note
• Cleaning the water tank, water
tray and NanoCloud rotary
humidication wick every week to
keep them hygienic.
1 Pull out the water tank (g. h).
2 Pull out the water tray (g. }).
3 Take the wick wheel o the wick
support (g. ~).
4 Rinse the water tank, water tray and
NanoCloud rotary humidication
wick under a running tap.
Note
• Do not take the NanoCloud rotary
humidication wick o the wheel
during cleaning.
• Do not scrub the NanoCloud rotary
humidication wick or place it under
direct sunlight.
• If necessary, use a mild detergent to
clean the water tank and water tray.
In this case, rinse the water tank and
water tray thoroughly.
5 Cleaning
Note
• Always unplug the appliance before
cleaning.
• Never immerse the appliance in
water or any other liquid.
• Never use abrasive, aggressive, or
ammable cleaning agents such as
bleach or alcohol to clean any part
of the appliance.
• Only the pre-lter and NanoCloud
rotary humidication wick are
washable. The NanoProtect lter
is not washable nor vacuum
cleanable.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface of the
appliance with a soft dry
cloth.
Every week
Rinse the water tank,
the water tray and
the NanoCloud rotary
humidication wick.
When the
cleaning icon
lights up
Clean the pre-lter.
Descale the NanoCloud
rotary humidication wick
with the water and white
vinegar or citric acid.