EasyManuals Logo

Philips LX8500W Service Manual

Philips LX8500W
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1-3
SPECIFICATIONS
GENERAL:
Mains voltage : 120V for /17
220-240V for /01/04/05
110-127V/220-240V Switchable for /69
Mains frequency : 50/60Hz
Power consumption : < 1W at Standby
< 130W at 1/8 P
rated
Dimension main unit : 360 x 40 x 305mm
TUNER:
FM
Tuning range : 87.5-108MHz
Grid : 50kHz
100kHz for /17/69
IF frequency : 10.7MHz ± 25kHz
Aerial input : 75 coaxial
Sensitivity at 26dB S/N : < 7µV
Selectivity at 600kHz bandwidth : > 25dB
IF rejection : > 60dB
Image rejection : > 25dB
Distortion at RF=1mV, dev. 75kHz : < 3%
-3dB Limiting point : 8µV
Crosstalk at RF=1mV, dev. 67.5kHz : > 28dB
Crosstalk at RF=1mV, dev. 40kHz : > 18dB /17/69
MW
Tuning range : 531-1602kHz
530-1700kHz for /17/69
Grid : 9kHz
10kHz for /17/69
IF frequency : 450kHz ± 1kHz
Aerial input : Frame aerial
Sensitivity at 26dB S/N : < 4.0mV/M
Selectivity at 18kHz bandwidth : > 20dB
IF rejection : > 45dB
Image rejection : > 28dB
Distortion at RF=50mV, m=80% : < 5%
AMPLIFIER:
Output power
Front : 50W RMS / channel
Rear : 50W RMS / channel
Center : 50W RMS
Subwoofer : 150W RMS
Frequency response ±3dB : 20Hz-50kHz
Hum (Volume Minimum) : 200nW
Residual noise (Volume Minimum) : 40nW
Input sensitivity
Aux In : 1V ± 3dB at 39k
Scart In : 500mV ± 3dB at 39k
Output sensitivity
Line Out (Left/Right) : 1V ± 1.5dB at 4.7k
Scart Out (Left/Right) : 1V ± 1.5dB at 4.7k
COMPACT DISC/VCD/DVD:
Video Decoding : MPEG-1/MPEG-2/MPEG-4/DivX 3.11,
4.x & 5.x
Video DAC : 12 Bits
Signal System : PAL / NTSC
Video Format : 4:3 / 16:9
CVBS Out
1)
CVBS level : 1.0 ± 0.1V
p-p
Luminance S/N : >= 55dB
S-Video Out
1)
Y level : 1.0 ± 0.1V
p-p
Y S/N : >= 60dB
C level (burst) : 286mV
p-p
+1/-4 dB
RGB/YUV Out
1)
Amplitude : 0.7 ± 0.1V
p-p
S/N : >= 60dB
1)
Output terminals to be terminated with 75

Other manuals for Philips LX8500W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips LX8500W and is the answer not in the manual?

Philips LX8500W Specifications

Sound Specifications IconSound Specifications
D/A converter24 bit, 96 kHz
frequency response30-48000 Hz
signal to noise ratio>95 dB
output power (RMS)3 x 100W, 2 x 75W + 150W
total sound power (RMS)600 W
satellite speaker frequency range120-50000 Hz
satellite speaker impedance6 ohm
center frequency range120-30000 Hz
center speaker impedance6 ohm
subwoofer frequency range30-120 Hz
subwoofer impedance4 ohm
Power IconPower
power supply110-240V, 50/60 Hz
standby power consumption< 1W
Weight and Dimensions IconWeight and Dimensions
center speaker dimensions435 x 76 x 70 mm
center speaker weight1.4 kg
packaging dimensions1000 x 516 x 495 mm
set dimensions360 x 40 x 305 mm
set weight2.5 kg
stand dimensions95 x 540 x 95 mm
subwoofer dimensions300 x 400 x 300 mm
subwoofer weight12 kg
surround speaker dimensions100 x 550 x 107 mm
surround speaker weight10.3 kg
weight including packaging43 kg

Related product manuals