Controls
9 OK
– to exit or confirm the selection.
0
w /
– Disc: skips to the previous/next chapter/title/
track.
–Tuner: selects a preset radio station.
!
9
– In DISC/USB mode, to stop playback or clear a
program.
@
2;
– In DISC/USB mode, to start or interrupt
playback.
#
VOL +/-
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
– selects a source in timer setting mode.
$
MODE
– selects various repeat modes or the shuffle play
mode for a disc.
%
SUBTITLE
– selects a subtitle language.
^
SLEEP/TIMER
Standby mode
– sets time for switching on the system
automatically.
Power-on mode
– sets the sleep timer function (auto off).
&
LOUDNESS
– enables or disables automatic loudness
adjustment.
*
DSC
– selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, ROCK, POP or FLAT;
for DVD: NORMAL, CONCERT, DRAMA,
ACTION or SCI-FI).
(
DBB
– enables or disables bass enhancement.
)
MUTE
– to interrupt or resume sound reproduction.
¡
DISPLAY
– displays information on TV screen during
playback.
™
A-B
–for VCD/CD/USB: to repeat a specific section
within the same track.
–for DVD: to repeat a specific section in a disc.
£
DIM
– selects different levels of brightness for the
display screen.
≤
AUDIO
for VCD
– sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
– selects an audio language.
∞
ZOOM
–DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on the TV screen.
§
ANGLE
– selects a DVD camera angle.
GOTO/STEREO
– In DISC mode, to fast search in a disc by
entering a time, title, chapter or track.
– FM: sets stereo or mono sound mode.
•
CLOCK/RDS
Standby mode
*– sets the system clock.
Playback mode
– displays the system clock.
For tuner
– displays RDS information.
ª
0
– ejects a disc from the disc loader.
º
CH.LEVEL (unavailable for this version)
⁄
SURROUND (unavailable for this
version)
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
– Then select the desired function ( 2;, ,
for example).
* = Press and hold the button for more than three seconds.
w
≥
w
w
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
Troubleshooting
No power.
“NO DISC” is displayed.
No picture.
Distorted or poor picture.
The aspect ratio of the screen cannot be
changed even though you have set the TV
shape.
Check if the AC power cord is properly
connected.
Check if the disc is inserted upside down.
Wait until the moisture condensed at the lens
has cleared.
Replace or clean the disc, see “Maintenance”.
Use a readable disc or correctly recorded format
MP3-CD.
Select the appropriate video input mode on the
TV set.
Check if the TV set is switched on.
Check the video connection.
Check if the system is securely connected.
If the progressive scan feature is activated but
the connected TV does not support progressive
signals or the cables are not connected
accordingly, see “Preparations-Setting up
Progressive Scan feature” for proper progressive
scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or
turn on to interlaced mode.
2) Press SYSTEM on the remote to exit the
system menu and then DISC to exit progressive
scan.
Sometimes a slight picture distor tion may appear.
This is not a malfunction.
Clean the disc.
Connect the system to the S-video input of your
TV set.
The aspect ratio is fixed on the DVD disc.
The aspect ratio may not be changed for some
TV systems.
To Next Page
Loading...
