Philips MX1060D - Specifications

1-3
SPECIFICATIONS
GENERAL:
Mains voltage : 230V
Mains frequency : 50Hz
Power consumption : < 4W at Standby
< 450W Maximum
Clock accuracy : < 3 seconds/day
Dimension (w x h x d) : 435 x 140 x 430mm
TUNER:
FM
Tuning range : 87.5-108MHz
Grid : 50kHz
IF frequency : 10.7MHz ± 70kHz
Aerial input : 75Ω coaxial
Sensitivity at 26dB S/N : < 6µV
Selectivity at 600kHz bandwidth : > 25dB
Image rejection : > 75dB
Distortion at RF=1mV, dev. 75kHz : < 3%
Crosstalk at RF=1mV, dev. 75kHz : > 18dB
Stereo threshold : < 28dB
MW
Tuning range : 531-1602kHz
Grid : 9kHz
IF frequency : 450kHz ± 3kHz
Aerial input : Frame aerial
Sensitivity at 26dB S/N : < 3.2mV/M
Selectivity at 18kHz bandwidth : > 20dB
IF rejection : > 38dB
Image rejection : > 28dB
Distortion at RF=50mV, m=80% : < 5%
AMPLIFIER:
Reference Output = 1W @ 8Ω
Output power: Stereo L/R : 2 x 60W DIN
1)
Surround L/R : 2 x 60W DIN
1)
Center : 60W DIN
1)
Distortion at 1kHz, rated power - 6dB : < 0.7%
Signal to Noise Ratio : > 65dB CCIR
Frequency response : 20Hz - 20kHz / ± 1dB
Treble control : 10kHz / ± 10dB
Bass control : 100Hz / ± 10dB
VCR / TV / CDR input : 460mV ± 70mV
Sub-woofer output (without load) : > 3V
Digital output (IEC958, 44.1kHz) : 500mV ± 20%
DVD SECTION:
Reference:
NTSC Test Disc : ABEX - TDV540
PAL Test Disc : PHILIPS - LVP10.01
Load Impedance : 75
Ω
Laser Type : 650 ± 5nm
Disc Diameter : 8cm / 12cm
Play time (12cm):
Single Layer : 2.12hr
Dual Layer : 4.01hr
2 Sides, Single Layer : 4.26hr
2 sides, Dual Layer : 8.02hr
Video Decoding : MPEG2
Video DAC : 10 Bits
Signal System : PAL / NTSC
Video Format : 4:3 / 16:9
Video S/N ratio : 56dB min.
Audio DAC : 24 Bits / 96kHz
Video Output:
CVBS Output : 1V
p-p
± 10%,
S-Video Output Y : 1V
p-p
± 10%
C : 286mV
p-p
± 10%
Digital Output : Coaxial & Optical
1)
8Ω, 1kHz, 0.7% THD