Philips Pi3100 - Status and Information about the Device

31EN
2 Conrm as prompted.
Upgrade
1 Make sure that your device is more than
75% charged.
2 Make sure that you have connected the
device to the Internet.
3 Select System updates > Upgrade.
» The device starts to check for the
rmware update.
» The rmware information is displayed.
4 Follow the onscreen instructions to
download the rmware update to your
device.
» When the message "An update.zip is
detected from your Device Storage.
Do you want to have this update?" is
displayed, the downloading is complete.
5 Select the option to start upgrading.
Note
• During the upgrading process, keep the screen or
button untouched.
• Keep the devicepowered on before the rmware
update is complete.
Status and information about the device
• In Status,Battery status: Display the
status of power charging.
• Battery level: Display remaining power
by percentage.
• IP address: Display the IP address that
is assigned to Pi3100 when the device
is connected a Wi-Fi network.
• Wi-Fi MAC address: Display the
unique identier that is assigned to the
network adapter of Pi3100. If MAC
address ltering is enabled on your
router, add the MAC address of Pi3100
to the list of devices that are allowed
to join the network.
Battery use: Display the power consumption by
each running application.
Legal information: Legal information for Pi3100
Model number: Model no. of the device
Android version:Firmware version of the
Android platform that the deviceis running on
Build number: Software version of Pi3100