Philips PM3350A - Page 10

Thank you for purchasing this Philips oscilloscope. It has been designed and
manufactured to the highest quality standards to give you many years of trouble
free and accurate measurements.
The powerful measuring functions listed below have been combined with an easy
logical operation to let you use the full power of this instrument each and every
day.
Should you have any comments on how this product could be improved then
please contact your local Fluke/Philips organisation.
All information given in this manual concerns the oscilloscopes
PM3350A/52A/55/57/65A/67A/75/77. If an action is to be taken, that is specific for
one member of the above mentioned family, this will be clearly indicated.
Main Capabilities
This Philips Digital Storage Oscilloscope (DSO) range consists of four members
(and derivatives), each of which has the following easy-to-use features:
60 MHz analog oscilloscope for PM3350A and PM3355
100 MHz analog oscilloscope for PM3365A and PM3375
100 Msamples/s single shot digital acquisition on both channels for PM3350A
and PM3365A
250 Msamples/s single shot digital acquisition on both channels for PM3355
and PM3375
Auto Set for instant signal viewing in both analog and digital oscilloscope
modes
Cursors for time and amplitude measurements in digital oscilloscope mode
Reference memories and non-volatile storage of all waveforms
Optional interface facilities for remote control and hard copy output
- Storage of 64 front settings