Philips Respironics SimplyGo - Page 33

30
SimplyGo User Manual
Visual, Audio
Indicators
Description What To Do
1st press of the
Power button
= 1 long beep�
2nd press of the
Power button to
turn device OFF
= 3 long beeps
On/O Symbol
This symbol appears
when the device is
powered on, or is ready
to be turned on or o�
Press the Power
button to turn the
device on or o�
Note: To prevent
inadvertent starts
and stops, the device
requires two presses
of the Power button
to turn it on and o�
Pulse Symbol
When operating in
either Pulse or Sleep
modes, this dot appears
in the lower right hand
corner of the display
screen whenever the
device delivers a pulse
of oxygen�
No action needed�
Pulse Mode Indicator
This symbol appears
when the device is
operating in Pulse
mode�
If this is your Mode
setting, no action is
needed�
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears�
Sleep Mode Indicator
This symbol appears
when the device is
operating in Sleep
mode�
If this is your Mode
setting, no action is
needed�
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears�