Philips RESPIRONICS System One - Humidifier Run Time Between Water Refills; Heated Tubing Specifications

26
Humidier Run Time Between Water Rells
CPAP Mode Bi-level Mode
Continuous Operation:
8 Hours 8 Hours
Temperature: 20° C (68° F) 20° C (68° F)
Humidity: 15% RH 15% RH
Humidier Setting: 5 5
Patient Pressure: 20 cm H
2
O 25 cm H
2
O
Note: Using standard ISO 17025 leak rate.
Heated Tubing Specications
Maximum Recommended Pressure
40 cm H
2
O
Note: Not all devices will provide the maximum pressure. Refer to your therapy device
instructions for use for maximum pressure.
Inner Diameter
15 mm (0.6 in.)
Length
1.83 m (6 ft.)
Heated Tubing Temperature Range
16° C to 32º C (60° F to 89° F)
Heated Tubing Temperature Cut-out
≤ 41° C (≤ 106° F)
Material
Flexible plastic and electrical components
Electrical (Heated tubing is powered by the attached heated humidier)
Refer to “Electrical” section of System One Heated Humidier Specications
Environmental
Refer to “Environmental” section of System One Heated Humidier Specications