EasyManua.ls Logo

Philips RESPIRONICS System One - How to Contact Philips Respironics; System Overview

Philips RESPIRONICS System One
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
How to Contact Philips Respironics
Should you experience trouble with this equipment or require assistance, please contact your
home care provider. If you need to contact Philips Respironics directly, contact customer service at
1-800-345-6443 (USA or Canada only) or go to www.respironics.com to nd your local customer
service contact information
You may also use the following addresses:
Respironics, Inc.
1001 Murry Ridge Lane
Murrysville, PA 15668 USA
System Overview
The System One Heated Humidier attaches to the therapy device and provides an air outlet port
to connect a breathing circuit. The breathing circuit is comprised of patient tubing, a mask, and
in some instances a separate exhalation device. The patient tubing can be Respironics heated
tubing, 22 mm (non-heated) performance tubing or 15 mm (non-heated) performance tubing. For
information related to the mask to be used, including any need for a separate exhalation device,
consult the instructions for use that accompany both the mask and therapy device.
The System One Heated Humidier with Heated Tubing is designed to deliver humidication
for added comfort during therapy. This humidication level is controlled through the output of
the heated humidier as well as the temperature of the optional heated tubing. Use of these two
accessories allows for a comfortable level of humidity to be maintained at the mask.
The System One Heated Humidier is comprised of the following components:
Heated Humidier - The heated humidier is the primary source of humidication. Humidi-
cation is controlled by adjusting the temperature of the heater plate. The heater plate is then
used to heat water found in the water tank. This manual includes instructions that explain
how to set up and take care of the heated humidier. For instructions on how to adjust
the output of the heated humidier, refer to the instructions for use that accompanied the
therapy device.
Water Tank - The water tank stores the water that will be used by the heated humidier.
This manual includes instructions that cover how to ll up and take care of the water tank.
Heated Tubing - The heated tubing is an optional accessory that is used, along with the
heated humidier, to control the provided humidication. This is accomplished by control-
ling the temperature of the air in order to ensure that it does not cool down prior to reaching
the mask. This manual includes instructions that cover how to connect and take care of the
heated tubing. For instructions on how to adjust the temperature of the heated tubing, refer
to the instructions for use that accompanied the therapy device.

Related product manuals