EasyManua.ls Logo

Philips RESPIRONICS System One - Available System One Heated Humidifiers; System Features and Contents

Philips RESPIRONICS System One
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Available System One Heated Humidiers
The System One Heated Humidier is available in the following congurations:
Heated Humidier - This humidier provides moisture to the patient circuit. It has a standard
air outlet port for use with Philips Respironics 15 and 22mm tubing.
Heated Humidier with Heated Tubing - This humidier provides moisture to the patient
circuit but also allows for the option of heated tubing. In order to function with the heated
tubing, it has a modied air outlet port that includes both a 3-pin connector and a heated
tubing locking mechanism. The heated tubing compatible System One Heated Humidier
can be seen in the “Connecting the Optional Heated Tubing” section of this manual.
System Features and Contents
IMPORTANT: Read and understand the entire manual for your therapy device before attempting to use
this humidier.
Water Ta nk
Maximum Fill Lines
Flexible Heated Tubing
(optional accessory)
Humidifier Connector End
Humidifier Door
Air Inlet Port
Air Outlet Port
Humidifier
(connects to
Therapy Device)
Heater Plate
This gure illustrates many of the device features and contents, described in the table below.
item DeScription
Humidier Connect your therapy device here.
Air Inlet Port Connects to the outlet port on the therapy device.
Air Outlet Port (conical, 22 mm)
(Standard Port shown here)
Connect the patient circuit here. (If you are using the optional heated
tubing, this outlet port will look slightly dierent. Refer to “Connecting the
Optional Heated Tubing” section of this manual.)
Heater Plate Warms the water in the water tank.
Humidier Door Open the door to access the water tank.
Humidier Door Lever Lift up on the lever to open the humidier door.
Water Tank The removable water tank holds the water for humidication.
Maximum Fill Lines The ll lines indicates the maximum water level for safe operation. (Found
on front and both sides of tank.)
Flexible Heated Tubing (optional)
The optional heated tube connects from the humidier to the patient’s mask.
Humidier Connector End Connect this end of the tubing to the humidier.
Note: This humidier is specied for use with Philips Respironics REMstar and BiPAP therapy devices only.

Related product manuals