Philips S10 - Intercom and Conference Calls; Intercom Calls and Call Transfer; Setting Up Conference Calls

18 EN
8 Intercom and
conference calls
Note
• This feature is available for multi- handset versions only.
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation between you,
another handset user and the outside callers.
Make a call to another
handset
Note
• If the base station only has 2 registered handsets, tap
to make a call to another handset directly.
1 Tap .
» For multi-handset versions, The
handsets available for intercom are
displayed. Then go to step 2.
» For two-handset versions, the other
handset rings. Then go to step 3.
2 Select a handset.
» The selected handset rings and
answers the call.
» The intercom is established.
3 Press [Cancel] or to cancel or end the
intercom call.
Note
• If the selected handset is busy, [Busy] is displayed on
the handset screen.
While you are on the phone
You can go from one handset to another during
a call:
1 Tap to access the options menu.
2 Tap .
» The current caller is put on hold.
» For multi-handset versions, The
handsets available for intercom are
displayed. Then go to step 3.
» For two-handset versions, the other
handset rings. Then go to step 4.
3 Select a handset.
4 Wait for the other side to answer your call.
Switch between calls
Tap / to switch between the outside call
and the intercom call.
Make a conference call
A 3-way conference call is between you,
another handset user and the outside callers. It
requires two handsets to share the same base
station.
During an external call
1 Tap to access the options menu.
2 Tap to initiate an internal call.
» The external caller is put on hold.
» For multi-handset versions, The
handsets available for intercom are
displayed. Then go to step 3.
» For two-handset versions, the other
handset rings. Then go to step 4.
3 Select a handset.
» The selected handset rings.
4 Press on the selected handset.
» The intercom is established.