Philips S10 - Alarm Clock; Alarm Clock Functions: Create, Edit, Delete, Turn Off

44 EN
21 Alarm clock
Your phone has a built-in alarm clock. Check the
information below to set your alarm clock.
Create an alarm
1 Tap from the main menu screen.
2 Tap , then +.
3 Follow the on-screen instructions to set
the alarm name, alarm time, recurrence
options and alarm tones.
» The alarm is set and is displayed on
the screen.
Tip
• You can create a maximum of 10 alarms.
Turn off an alarm
Before the alarm rings
1 Tap from the main menu screen.
2 Tap , then +.
3 Select an existing alarm.
4 Tap the button on the right side to
deactivate the alarm.
» The button becomes grey.
When the alarm rings
• Ta p [Close] to turn off the alarm.
• Tap [Snooze]to snooze.
» The alarm rings again after 5 minutes.
After you snooze it for 3 times, the
snooze function is off.
Edit an alarm
1 Tap from the main menu screen.
2 Tap .
» The existing alarms are displayed.
3 Tap to enter the options menu.
4 Select [Edit].
5 Select an existing alarm.
6 Follow the screen instructions to edit
the alarm name, alarm time, recurrence
options and alarm tones.
» The setting is saved.
Delete an alarm
1 Tap from the main menu screen.
2 Tap .
» The existing alarms are displayed.
3 Tap to enter the options menu.
4 Select [Delete], then select one or multiple
alarms to be removed.
» The selected alarm are deleted.
Note
• If you select [Delete all], a conrmation request is
displayed. Tap [Yes] to delete all alarms.