Philips S10 - Display and Call Settings; Call Settings: Auto Prefix and Number Codes

33EN
Display settings
You can change the display of the phone during
standby mode.
Set the brightness, wallpaper and
backlight
You can change the display properties during
standby mode, such as display brightness,
backlight behaviour and wallpaper.
1 Tap from the main menu screen.
2 Select [Phone settings] > [Display] > [Bri
ghtness]/[Wallpaper]/[Backlight].
3 Select an option.
» The setting is saved.
Restore default settings
You can reset your phone settings to the
original factory settings.
1 Tap from the main menu screen.
2 Select [Phone settings] > [Factory
settings].
3 Select if you want to remove the data.
4 Tap [OK] to conrm.
» All settings are reset.
Note
• If you select to keep the data when restoring default
settings, the contacts, call logs and answering machine
messages will be retained.
Demo mode
Demo mode shows key features of the product.
You can exit demo mode by tapping on the
screen.
Call settings
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
• The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Set auto prex
1 Tap from the main menu screen.
2 Select [Call settings] > [Auto prex].
3 Enter the detect number, then tap [OK] to
conrm.
4 Enter the prex number, then tap [OK] to
conrm.
» The setting is saved.
Note
• This is a country dependent feature.
• To enter a pause, press and hold #.
• If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
• The feature is unavailable if the dialed number starts
with * and #.
Set the carrier code, area code,
country code and domestic code
You can enter these values for your phone's
current location if you have used them in
entering numbers on your computer. In case
you transfer a number to your phone, your
phone will use this information to remove these