Philips S10 - Select the Recall Duration; Dial Mode

34 EN
codes from local numbers, as they can lead to
unsuccessful calls when dialed on a landline.
For example if on your computer you have
stored the number +49 40 1234567, with +49
being the local country code and 40 being the
area code, the phone will save that number in
your phone as 040 1234567 (that is, removing
the country code and add a '0' for local
numbers).
1 Tap from the main menu screen.
2 Select [Call settings] > [Carrier
code]/[Area code]/[Country
code]/[Domestic code].
3 Enter a code of 4 digits at maximum, then
tap [OK] to conrm.
» The setting is saved.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1 Tap from the main menu screen.
2 Select [Call settings] > [Recall time].
3 Select an option.
» The setting is saved.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the rst ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the rst
ring. You can change this setting to suit your
preference. This feature only applies to models
with rst ring support.
Turn the rst ring on/off
1 Tap from the main menu screen.
2 Select [Call settings] > [First ring].
3 Select [On]/[Off].
» The setting is saved.
Note
• To reset the rst ring status, go to the reset menu (see
'Restore default settings' on page 33).
Auto clock
Note
• This service is network dependent.
• Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1 Tap from the main menu screen.
2 Select [Call settings] > [Auto clock]
3 Select [On]/[Off].
» The setting is saved.
Dial mode
Note
• This feature is country dependent and only applies to
models that support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
1 Tap from the main menu screen.
2 Select [Call settings] > [Dial mode].
3 Select an option, then tap [OK] to conrm.
» The setting is saved.