Philips S10 - Setup Wizard; Set the Date and Time; Phone Software Version

35EN
Line settings
You can select whether to use the landline or a
connected mobile phone as the default line for
outgoing calls.
1 Tap from the main menu screen.
2 Select [Call settings] > [Line settings].
3 Select a new setting.
» The setting is saved.
Tip
• You can select from [Home]/[Manual] or one of
the mobile lines for an outgoing call. If a mobile line
is selected and it is busy, [Home] will be selected
automatically.
• An idle line means a phone line is not busy at the
moment.
Voice mail and info service number
You can set the voice mail and info service
number.
1 Tap from the main menu screen.
2 Select [Call settings] > [Voicemail]/[Info
service]
3 Enter the number, then tap [OK] to
conrm.
» The setting is saved.
Setup wizard
This option leads you to [Eco mode], [ECO+
mode] and [Silent mode] settings.
1 Tap from the main menu screen.
2 Select [Setup wizard].
» The setup screens are displayed.
Tip
• For information, see the chapters on 'Settings' and
'Silent mode'.
Set the date and time
Set the date and time
1 Tap from the main menu screen.
2 Select [Date & time] > [Set date] or [Set
time].
3 Set the date or time, then tap [OK] to
conrm.
» The setting is saved.
Set the date and time format
1 Tap from the main menu screen.
2 Select [Date & time] > [Date format] or
[Time format].
3 Select an option.
» The setting is saved.
Note
• The date and time format setting is country dependent.
Phone software version
You can check the current software version of
your phone.
1 Tap from the main menu screen.
2 Select [Phone settings] > [Firmware
version].
» The software version is displayed.
Tip
• To update your phone's software, download the
[Philips Phone Manager] software for your computer
from www.philips.com/support.