Philips S10 - Handset Registration Management; Registering and Unregistering Handsets

36 EN
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
1 Tap from the main menu screen.
2 Select [Registration] > [Register].
3 Press and hold on the base station for
5 seconds.
4 Enter the system PIN/passcode. Tap
[Delete] to make corrections.
5 Tap [OK] to conrm the PIN/passcode.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
• If the PIN/passcode is incorrect or no base is found
within a certain period, a notication message will be
displayed on your handset. Repeat the above procedure
if registration fails.
• The preset PIN/passcode is 0000. No change can be
made on it.
Unregister handsets
If two handsets share the same base station, you
can unregister a handset with another handset.
1 Tap from the main menu screen.
2 Select [Registration] > [Unregister].
3 Enter the system PIN/passcode. Tap
[Delete] to make corrections.
4 Select the handset number to be
unregistered.
» The handset is unregistered.
Tip
• The handset number is displayed beside the handset
name in standby mode.