Philips SCD580 - Temperature

22
• If the temperature is below the set range,
the temperature alert symbol on the
display has only one segment and ashes.
The message ‘TOO COLD’ appears on the
display.
• If the temperature is above the set range,
the temperature alert symbol on the
display has three segments and ashes. The
message ‘TOO HOT’ appears on the display.
7.4.4 Stopping the timer
1 Press the menu button and select ‘Feed Timer’.
2 Use the + and - buttons to select ‘Stop &
Reset’ and press OK to conrm.
7.5 Temperature
A baby sleeps comfortably at a temperature range
between 16°C/61°F and 20°C/68°F. You can set
a minimum and maximum temperature range
and an alert to warn you that the temperature is
outside the set minimum and maximum range.
1 Select ‘Temperature’ in the menu with the +
and - buttons and press OK to conrm.
2 Select ‘Temp Range’ with the + and - buttons
and press OK to conrm.
• The minimum temperature indication starts
ashing on the display.
3 Use the + and - buttons to set the minimum
temperature range between 10°C/50°F and
19°C/66°F. Press OK to conrm.
• The maximum temperature indication starts
ashing on the display.
4 Use the + and - buttons to set the
maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to
conrm.
5 Select ‘Alert’ with the + and - buttons. Press
OK to conrm and to start setting the
temperature alert option.
6 Use the + and - buttons to select one of the
alert options. The options available are sound
only, sound and vibration, vibration only and
display only. Press OK to conrm.
• After you have conrmed your choice of the
alert option, the temperature alert symbol
appears on the display.
7 Select ‘Temp Scale’ with the + and - buttons.
Press OK to conrm and to start setting the
temperature scale.
8 Select ‘Celsius’ or ‘Fahrenheit’ and press OK to
conrm.
• The temperature in the set scale appears
on the display. If the temperature is within
the set range, the temperature alert symbol
has two segments.