EN
41
Possible Cause
• Solution
Power unavailable.
• Check that the SLA5520 power cable is properly connected and that the power is
switched on.
SLA5520 is not known to the network.
• Check that the MAC address for the SLA5520 has been entered correctly in the
wireless network’s MAC Access Control. Turn off the Wireless Music Adapter
and turn it on again.
Internet unavailable.
• Check that the Internet base station has an active connection to the Internet.
Wireless network incorrectly configured.
• Open the SLA5520 Wireless Music Adapter PC Utility and select the Wireless
Music Link that has the problem. Click the ‘Profiles’ button and check that the
active profile is correctly configured for your network. Turn on the SLA5520 and
ensure that the correct profile has been selected under Network Profiles.
‘Internet Connection Sharing’ not enabled on PC.
• If your connection to the Internet is made available via a single PC, that PC must
enable ‘Internet Connection Sharing’ in order to display the clock on the LCD
screen. See ‘Enabling Internet Connection Sharing on Your PC’.
This can be caused by network delays when sending out UPnP requests.
• Make sure the SLA5520 is connected to the power supply and that the batteries
in the remote control are fresh and inserted correctly.
Wait a few seconds and try again. If the problem persists, unplug the Wireless
Music Adapter, wait a minute, plug it in again and then turn it on again.
No music files in the Media Manager Music Library.
• Follow the instructions under ‘Installing Philips Media Manager’ to add files to the
MusicLibrary.
Media Manager is not running.
• Start the Philips Media Manager server by clicking the Media Manager icon in right
side of the Windows task bar on your computer.
File has been moved or deleted but link is still in Philips Media Manager library.
• The Philips Media Manager library stores a link to a music file, not the file itself. If
you move or delete the music file and do not delete it or reselect it in the Philips
Media Manager Library, the SLA5520 will be unable to locate the file. Open Philips
Media Manager and delete and/or add the track from the correct file location.
File permissions on music file are incorrect.
• Check that you have read access to the music file on the computer where it is
stored. If this is on a computer other than the UPnP server computer, check that
the network connection between these two computers is active.
There are limitations regarding the presets, depending on the PC Server tool used
(for example Philips Media Manager, EZ Server, Intel, Mediabolic).
• The PC server software may not be fully compatible with the UPnP specification.
There is no workaround other than storing the presets again.
Problem
Date/time is not displayed when the
SLA5520 is switched on.
The SLA5520 does not react to remote
commands and hangs in the UPnP Menu
structure.
Unable to browse music files.
Unable to play music file
Presets do not work anymore after a
new CD is ripped or a server is reset.
Troubleshooting
To Next Page
Loading...
