Philips TAB7807 - Listening to External Audio Devices; Playing Audio via USB

19EN
Listen to an external device
Ensure that the soundbar is connected to
the TV or audio device.
1 Press the button repeatedly on
the soundbar or on the remote
control to select the Audio in,
Optical, HDMI eARC/ARC, HDMI in
mode.
2 Operate your audio device directly
for playback features.
3 Press the +/– (Volume) buttons to
adjust the volume to your desired
level.
» «üâĚłâēâØŊÿĚö½ÞÿŻâľâĚŊ½ŏÞÿġ
format, the soundbar will display
the following as follows:
Audio (abbreviation) Display
LPCM 2ch PCM
LPCM 5.1ch PCM
LPCM 7.1ch PCM
Dolby Digital Dolby AUDIO
Dolby TrueHD Dolby AUDIO
Dolby Digital Plus Dolby AUDIO
Dolby Atmos -
Dolby TrueHD
Dolby Atmos
Dolby Atmos -
Dolby Digital Plus
Dolby Atmos
Note
•
The soundbar may not be able to decode all
digital audio formats from the input source. In this
case, the system will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to
PCM or Dolby Digital (Refer to the user manual
of the input source device for its audio setting
details) with HDMI in / HDMI ARC / Optical input.
Play audio through USB
Enjoy audio on a USB storage device,
łŏØü½ł½Ě]~ԝĻē½Ůâľ½ĚÞſ½łü
memory, etc.
1 Insert the USB device.
2 Press the button repeatedly on
the soundbar or on the remote
control to select the USB mode.
» USB is displayed on the display
panel.
3 During playback:
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
Note
•
This product may not be compatible with
certain types of USB storage devices.
• If you use a USB extension cable, USB hub,
or USB multifunctional card reader, the USB
storage device may not be recognized.
• Do not remove the USB storage device while
ľâ½ÞÿĚöžēâł֣
• The system can support USB devices with up to
128 GB of memory.
• This system can play MP3 / WAV / FLAC.
• Support a USB port: 5V 500mA.