Philips TAB7807 - Remote Control; Prepare the Remote Control

9EN
Remote control
This section includes an overview of the
remote control.
1
(Standby-On) button
• Switch the soundbar On or to
standby.
• Long press for 20 seconds in power
on state to enable or disable APD
(15 minutes Auto-Standby)
2
(Source)
• Press to select an input source for
soundbar.
• Press and hold to disconnect all
devices and enter the Bluetooth
pairing mode.
3
(Dolby Atmos)
ªÿľŊŏ½ēŏľľġŏĚÞÞâØġÞâľġĚֳġŻ֣
4
(Mute)
Mute or restore volume.
5
Navigation buttons
/ (Left/Right)
• Skip to the previous or next track in
USB/BT mode.
• Navigate Left/Right in menu
structure.
/ (Up/Down)
• Navigate up/down in menu structure.
(Center)
• Start, pause or resume play in USB/
BT mode.
6
(MENU)
Enter setup menu.
7
(Back)
• Return to the previous menu.
• Exit menu.
8
+/- (System’s volume)
Increase / decrease the system’s
volume.
9
+/- (Subwoofer’s Volume)
Increase / decrease the subwoofer’s
volume.
5
6
3
1
8
9
7
4
2
Prepare the remote control
• The provided remote control allows
the unit to be operated from a
distance.
• Even if the remote control is
ġĻâľ½ŊâÞŨÿŊüÿĚŊüââŻâØŊÿŧâľ½Ěöâ
19.7 feet (6m), remote control
operation may be impossible if there
are any obstacles between the unit
and the remote control.
• If the remote control is operated
near other products which generate
infrared rays, or if other remote
control devices using infra-red rays
are used near the unit, it may operate
incorrectly. Conversely, the other
products may operate incorrectly.