1. General description
The TDA8950 is a high-efficiency Class D audio power amplifier. The typical output power
is 2 × 150 W with a speaker load impedance of 4 Ω.
The TDA8950 is available in both HSOP24 and DBS23P power packages. The amplifier
operates over a wide supply voltage range from ±12.5 V to ±40 V and features low
quiescent current consumption.
2. Features
n Pin compatible with TDA8920B for both HSOP24 and DBS23P packages
n Symmetrical operating supply voltage range from ±12.5 V to ±40 V
n Stereo full differential inputs, can be used as stereo Single-Ended (SE) or mono
Bridge-Tied Load (BTL) amplifier
n High output power in typical applications:
u SE 2 × 150 W, R
L
=4Ω (V
P
= ±37 V)
u SE 2 × 170 W, R
L
=4Ω (V
P
= ±39 V)
u SE 2 × 100 W, R
L
=6Ω (V
P
= ±37 V)
u BTL 1 × 300 W, R
L
=8Ω (V
P
= ±37 V)
n Low noise
n Smooth pop noise-free start-up and switch off
n Zero dead time switching
n Fixed frequency
n Internal or external clock
n High efficiency
n Low quiescent current
n Advanced protection strategy: voltage protection and output current limiting
n Thermal FoldBack (TFB)
n Fixed gain of 30 dB in SE and 36 dB in BTL applications
n Fully short-circuit proof across load
n BD modulation in BTL configuration
3. Applications
n DVD
n Mini and micro receiver
n Home Theater In A Box (HTIAB) system
n High-power speaker system
TDA8950
2 × 150 W class-D power amplifier
Rev. 02 — 11 June 2009 Product data sheet
To Next Page
Need help?
General
