EasyManua.ls Logo

Philips VES1.1E - Page 26

Philips VES1.1E
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
o Allows CVBS output of all source inputs
2D Graphics
Engine
o Hardware Graphics Engine for responsive
o Interactive applications
o Supports point draw, line draw, rectangle draw/fill, text draw and trapezoid
draw
o BitBlt, stretch BitBlt, trapezoid BitBlt, mirror BitBlt and rotate BitBlt
o Raster Operation (ROP)
o Support Porter-Duff
VIF Demodulator
o Compliant with NTSC M/N, PAL B, G/H, I, D/K, SECAM L/L' standards
o Audio/Video dual-path processor
o Stepped-gain PGA with 25 dB tuning range and 1 dB tuning resolution
o
Maximum IF gain of 37 dB
o Programmable TOP to accommodate different tuner gain and SAW filter
insertion loss to optimize noise and linearity performance
o Multi-standard processing with single SAW
o Supports silicon tuner low IF output architecture
DVB-T Demodulator
o Digital carrier frequency offset correction: ±500KHz
o Optimised for SFN channels with pre/post-cursive echoes inside/outside
the guard
o Acquisition range ±857kHz includes up to 3x ±1/6 MHz transmitter offset
o Meets Nordig Unified 1.0.3, D-Book 5.0, EICTA E-Book/C-Book test
requirement
o ±400kHz internal carrier offset recovery range
o 6.8 usecs echo cancellation at 7 Msym/s
o Supports IF, low-IF, zero-IF inputs
o
Ultra-fast automatic blind UHF/VHF channel scan (constellations and
symbol rate)
Co
nnectivity
o Two USB 2.0 host ports
o USB architecture designed for efficient support of external storage
devices in conjunction with off air broadcasting
Miscellaneous
o DRAM interface supporting one 16-bit DDR2 @1066MHz
o Supports PVR
o Supports Common Interface for conditional access support
o Bootable SPI interface with serial flash support
o Parallel interface for external NAND flash support
o Power control module with ultra low power MCU available in standby
mode
o 380-ball LFBGA package
o Operating Voltages: 1.26V (core), 1.8V (DDR2), 2.5V and 3.3V (I/O and
analog)

Table of Contents

Related product manuals