EasyManua.ls Logo

Philips VES1.1E - LNBH23 L (U6); 13.1 Description; 13.2 Features

Philips VES1.1E
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 LNBH23L (U6)
13.1 Description
Intended for analog and digital satellite receivers,the LNBH23L is a monolithic voltage
regulator
and interface IC, assembled in QFN32 5 x 5 specifically designed to provide the 13 / 18 V
power supply and the 22 kHz tone signalling to the LNB down-converter in the antenna
dish or to
the multi-switch box. In this application field, it offers a complete solution with extremely
low
component count, low power dissipation together with simple design and I²C standard
interfacing.
13.2 Features
Complete interface between LNB and I²C bus
Built-in DC-DC converter for single 12 V supply operation and high efficiency (typ.
93% @ 0.5 A)
Selectable output current limit by external resistor
Compliant with main satellite receivers output voltage specification
Auxiliary modulation input (EXTM pin) facilitates DiSEqC™ 1.X encoding
Accurate built-in 22 kHz tone generator suits widely accepted standards
Low-drop post regulator and high efficiency step-up PWM with integrated power
NMOS allow low power losses
Overload and over-temperature internal protections with I²C diagnostic bits
LNB short circuit dynamic protection
+/- 4 kV ESD tolerant on output power pins

Table of Contents

Related product manuals