Phonak Roger Table Mic - 4 Using Roger Table MIC; Connecting to Multimedia Devices

or
2.
1.
20 21
Roger Table Mic is a flexible, intelligent product. It
detects which situation you are in and adapts its sound
processing settings automatically to provide you the best
speech understanding possible.
Place Roger Table Mic in the middle of a table to listen to
a group of people.
For the best speech perception avoid placing Roger
Table Mic close to noise sources such as projectors
and laptops.
4. Using Roger Table Mic
4.1 Connecting to multimedia devices
You can connect Roger Table Mic to an audio source –
such as a conference telephone, tablet or computer - to
hear its audio signal directly in your hearing aids.
1. Connect one end of the
supplied audio cable to the
aux- input of Roger
TableMic.
2. Connect the other end
to the audio output of
the audio source.
After you have activated the
multimedia device’s audio signal,
Roger Table Mic will detect this signal
and mute its own microphone.