Phonak Roger Table Mic - Setting up the Remote Control; Switching on and off

14 15
You can also charge Roger TableMic by connecting it
to a computer’s USB port using the supplied charging
cable.
Indicator lights (battery status)
Indicator light Meaning
Charging
Fully Charged
Low battery – charge Roger TableMic.
In addition, you will hear beeps in your
hearing aids.
3.3 Setting up the remote control
On delivery the remote control battery is protected by a
plastic tab.
Remove the plastic tab from the battery to activate the
remote control
3.4 Switching on and off
To switch Roger TableMic on, press the on/off
button for one second until the indicator light turns
green.
Indicator light (Switching on)
Indicator light Meaning
Powering on
Switched on