Phrozen Sonic - Post-Printing Procedures; Cleaning Prints and Printer Components

19
IX. AFTER PRINTING PROCESS
PLEASE KINDLY FOLLOW THE ENVIRONMENT PROTECTION
RULES IN YOUR LOCAL AREA WHILE YOU DO THE CLEANING
PROCESS AFTER PRINTING.
1. Clean Your Prints
Step 1
è
Take off your print slightly from the build platform with metal
scraper.
Ø Tips Always wear gloves and be aware of any danger operations with
the metal scraper.
Step 2
è
Clean your prints by Phrozen Wash/IPA/95% alcohol until no
resin on your print.
Ø Tips Phrozen Washè https://reurl.cc/8lOv0o
Ø Tips Ultra-sonic Clearè https://reurl.cc/Gklj43
Step 3
è
Place it until the external surface dry enough.
Step 4
è
Post cure your print by Phrozen Cure/405nm UV light.
Ø Tips Phrozen Cureè https://reurl.cc/NaEQQq
2. Tidy Up Your 3D Printer
(a) Safely shutdown your Phrozen 3D printer
Ø Tip 1 Please kindly see the description of Ⅲ.2 POWER OFF for more
Information.
Ø Tip 2 ALWAYS SHUTDOWN YOUR 3D PRINTER FIRST before you
clean the build platform & resin vat for avoiding static electricity
damaging your printer.
(b) Clean the build platform
Step 1
è
Take off your print slightly from the build platform with metal
scraper.
Ø Tips Always wear gloves and be aware of any danger
operations with the metal scraper.
Step 2
è
Clean your build platform by Phrozen Wash/IPA/95% alcohol
until no resin on the platform.
(c) Clean the resin vat
Step 3
è
Store your used resin with a whole black, well-sealed bottle
in a dark and cool place.