VIII. START TO PRINT
Ø Tip 1 Always wear gloves, goggles, long-sleeved clothing during your
printing process.
Ø Tip 2 Resin is a kind of chemical material, if feeling any uncomfortable
during using it or, moreover, accidently eating it, please go to the nearest
medical unit asap for further help.
Ø Tip 3 Always wash out completely if any contact between resins and your
body, furthermore, if feeling any uncomfortable, please go to the nearest
medical unit asap for further help.
Ø Tip 4 KEEP THE RESIN SAFELY AWAY FROM CHILDREN.
Ø Tip 5 Please shake the resin properly before using it.
Ø Tip 6 Kindly keep the resin capacity below 1/2 height of the resin vat.
Ø Tip 7 Always stir the vat-stored resin properly before starting your printing
process.
Ø Tip 8 Make sure there’s NO OBJECT ON THE LCD OR IN RESIN VAT except
resin.
Ø Tip 9 Kindly keep your printing environment under 25°C.
Ø Tip 10 If refilling resins is required during printing process, please refill the
resin during the UV light off with platform raising-up.
Ø Tip 11 Always clean the resin immediately if it spills out.
To Next Page
Loading...
