PI PiezoWalk E-712 - Page 20

User Manual
E712T0010, valid for E-712.N1, E-712.1AM, E-712.1AN, .2AN, .3AN
CMo, BRo, 10/31/2024
Physik Instrumente (PI) SE & Co. KG, Auf der Römerstraße 1, 76228 Karlsruhe, Germany page 20 / 40
Phone +49 721 4846-0, fax +49 721 4846-1019, e-mail info@pi.ws, www.pi.ws
Example:
Fig. 13: Setup for PiezoWalk channel 1; a NEXLINE® drive is connected
Piezo amplifier channels 1 to 4 are assigned to PiezoWalk channel 1 (see the marking in Fig. 13):
 Piezo amplifier channel 1 is assigned to the first pair of shearing components
 Piezo amplifier channel 2 is assigned to the second pair of shearing components