- Provide the specific tool connecting to component 1, bottom end, the comp. 22 and the lower crankcase
the component 11.
Specific tooling
19.1.20000 Tool for front suspension overhaul
Position the swing arm - steering tube unit, provided with guide pin, on the specific tool previously
prepared; insert the pin, previously greased with lubricant on component 22 and push it through the
action of the press to until bringing the component 22 to a stop on the steering tube.
Recommended products
AGIP GREASE PV 2 Multipurpose grease
Suspensions APE TM Benzina
SS - 122
To Next Page
Loading...
Need help?
General
