PIAGGIO Ape User Manual

x 1000 Km - (Months) 1
(4)
5
(12
)
10
(24
)
15
(36
)
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
Tyre wear and inflation pres-
sure - Inspection
* * * * * * * * * * * * * * * * * * *
Air filter - Replacement • • • • • • • • •
Parking brake - Adjustment * * * * * * * * * * * * * * * * * * *
Electrical system - Inspection * * * * * * * * * *
Cylinder and fan system - In-
spection
* * * *
Light transmission on the en-
gine - Lubrication
• • • • • • • • • • • • • • • • • •
Brake fluid level - Inspection * * * * * * * * * * * * * * * * * * *
Brake fluid - Replacement (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*)
Engine oil and differential -
Replacement
• • • • • • • • • •
Headlight - Inspection/Ad-
justment
* * * * * * * * * *
Vehicle and brake test - In-
spection
* * * * * * * * * * * * * * * * * * *
Suspension - Inspection * * * * * * * * *
Piston cylinder head exhaust
port - Cleaning
• • • • • • • • •
Flexible transmissions - Lu-
brication
• • • • • • • • • • • • • • • • • •
Exhaust pipe - Cleaning • • • • • • • • •
Pressure flexible brake pipes
- Replacement
• • •
Labour time 90' 55' 19
0'
55' 21
5'
55' 23
0'
55' 21
5'
55' 19
0'
55' 25
0'
55' 19
0'
55' 21
5'
55' 23
0'
Suggested products chart
RECOMMENDED PRODUCTS
Product
Description Specifications
AGIP CITY TEC 2T Oil for 2-stroke petrol engines JASO FC, ISO-L-EGD Specifications
AGIP ROTRA MP 80W-90 Oil with specifications SAE 80W-90, API
GL-5
Gearbox oil
AGIP BRAKE 4 Brake fluid Specifications - FMVSS DOT 4
AGIP GREASE PV 2 Multipurpose grease NLGI 2 specifications; ISO-LXBIB2
AGIP ARNICA 46 Oil for hydraulic tilting system pump Oil for hydraulic circuits corresponding to
specific ISO VG 46, DIN 51524 HVLP
AGIP SUPERDIESEL MULTIGRADE
15W-40
Engine oil (recommended for warm cli-
mates)
SAE 15W-40, API CF-4/SG
Carburettor
Disassemble the carburettor in its parts, wash all of them with pure petrol, dry all body grooves with
compressed air to ensure adequate cleaning.
Check carefully that the parts are in good condition.
THROTTLE VALVE
The throttle valve should slide freely in the mixing chamber. Replace it in case of excessive clearance
due to wear.
If there are wear marks in the mixing chamber causing inadequate tightness or a free valve slide (even
if it is new), replace the carburettor.
It is advisable to replace the gasket at every refit
Maintenance APE TM Benzina
MA - 34

PIAGGIO Ape Specifications

General

Brand	PIAGGIO
Model	Ape
Category	Automobile
Language	English