SEALING RING ON REAR HUB - FITTING
Position the seal ring (4) with the specific punch (3).
Specific tooling
T.0021071 Punch to fit bearings and seal rings
BALL BEARING ON REAR HUB - FITTING
Operate with the stove as described in the specific section "Ball bearing and circlip on the front brake
drum" and insert the ball bearing (5) in its housing using the specific punch (3).
Specific tooling
T.0021071 Punch to fit bearings and seal rings
APE TM Benzina Suspensions
SS - 129
To Next Page
Loading...
