- Centre it with respect to the lower edge of the
frame that houses the pane, observing proper dis-
tances (lower side and upper side). Also check that
the distance of the pane from the edge of the hous-
ing frame is the same on both sides.
- The adhesive sealing compound cartridge has two components that should be come into contact inside
that cartridge; they should be carefully mixed before being used. For this operation, use the whisk for
the cartridge that must be attached to a drill (slow rotation) and inserted into the same cartridge.
Proceed at this point the mixing operation for the duration of 3', slowly rotating the drill.
CAUTION
IN ORDER TO ENSURE THE EFFECTIVENESS OF THE BONDING, AND THEN THE RESULTING
GLASS SEAL, ALWAYS MAKE SURE THAT THE PRIMER AND THE ADHESIVE SEALING COM-
POUND, BEFORE THEY ARE USED, HAVE NOT LOST THE REQUIRED PROPERTIES FOR THE
FUTURE EXCEEDING OF THE STORAGE LIMITS.
CAUTION
THE EXPIRATION DATE OF THE RECOMMENDED PRODUCTS, IS 12 MONTHS FROM THE DATE
OF PRODUCTION.
Specific tooling
AC/UNI Whisk Whisk for "Thio Bostik 80" cartridge
Make sure that a period of 30' minimum and 4h maximum has elapsed from the moment the bottom
primer was applied.
Then insert the cartridge in the appropriate gun, which should be connected to a compressed air unit.
Be careful to apply the adhesive sealing compound as a uniform string between the frame and the pane.
N.B.
BOTH THE PRIMER AND THE ADHESIVE SEALING COMPOUND ARE AVAILABLE AT THE PIAG-
GIO SPARE PARTS DISTRIBUTION CENTRE.
FOR TOOLS, MIXING WHISK AND GUN, FOR CORRECT USE OF THE SEALANT, REFER TO
DEALERS OF THE BOSTON COMPANY.
Specific tooling
AC/UNI Gun Gun for "Thio Bostik 80" cartridge
AC/UNI Whisk Whisk for "Thio Bostik 80" cartridge
Chassis APE TM Benzina
CH - 138
To Next Page
Loading...
