PIEPS PRO BT - Page 15

Manual PIEPS PRO BT/POWDER BT | Firmware v3.0 | 02/2023
15 / 28
transceiver will remain in Search. If a signal is encountered during the countdown, the timer will also be reset
and the transceiver will remain in search.
Beacon
function
SEARCH
WARNING
SEND
Display
indication
Search display
Sound
Search sound
Manual abort
Turn device or press MARK button
Turn device off or into send mode
START WARNING
Setting 1 (60 s) 0:30 min
Setting 2 (90 s) 1:00 min
Setting 3 (120 s) 1:30 min
SWITCHING TO SEND
1:00 min
1:30 min
2:00 min
To switch the PIEPS PRO BT/POWDER BT back into search-mode:
Move the slider (1B) downwards, until it locks in the position SEND.
Move the slider lock (1C) to the left and the slider (1B) upwards in the position SEARCH.