Manual PIEPS PRO BT/POWDER BT | Firmware v3.0 | 02/2023
3 / 28
1. INTRODUCTION
Thank you for purchasing a PIEPS beacon!
Register your PIEPS beacon in the PIEPS APP (iOS, Android) or at my.pieps.com and get:
- A warranty extension free of charge
- Important information about software updates
Your PIEPS beacon includes all tried and tested PIEPS features:
• 3 antenna technology
• Big, circular receiving range for a quick and stable signal detection
• Perfect signal processing, even in difficult situations (multiple burials)
• Mark function
• Comprehensive self-check
• Easy to use group check
• PIEPS interference protection
• Auto search-to-send
• iPROBE support
• Device management via PIEPS APP
The PIEPS PRO BT provides additional functionality for maximum support in professional use, like SCAN
function, Analog mode, Victim selection and Group check Pro-mode.
An avalanche beacon does not protect against avalanches! Detailed knowledge of avalanche prevention is
as indispensable as regularly practicing victim searches in an emergency. The following procedures and tips
relate only to special usage in conjunction with the PIEPS beacon. The basic line of action in an emergency – as
explained in specialist publications and material from avalanche courses – must be followed.
With the PIEPS beacon you have a product that is state of the art in terms of safety and user-friendliness.
Despite this, the PIEPS beacon can pose risks if used inappropriately or incorrectly. We refer to possible
hazards in chapter 2 and with safety notes placed throughout the operating manual.
This operating manual is intended to ensure the safe use of the PIEPS beacon. The safety instructions in this
document must be followed at all times. Before you use the PIEPS beacon, you must have read and
understand this operating manual.
Pieps GmbH is not liable for technical or printing errors in this operating manual, neither is any liability accepted
for damage caused directly or indirectly by the delivery, performance or use of this operating manual.
Copyright
©
Pieps GmbH, 02/2023
This translation of the original manual is protected by copyright. All rights, especially the rights of reproduction, distribution and translation,
are reserved. No part of this document may be reproduced or stored, processed, duplicated or distributed using electronic systems in any
form (photocopy, microfilm or other method) without the written consent of Pieps GmbH. Violations may incur criminal penalties.
To Next Page
Loading...
Need help?
General
