Manual PIEPS PRO BT/POWDER BT | Firmware v3.0 | 02/2023
9 / 28
3. PACKAGING
• 1x PIEPS PRO BT/POWDER BT
• 3x Alkaline battery (in battery compartment)
• 1x PIEPS PRO BT/POWDER BT carrying system
• 1x PIEPS hand loop
• 1x Quick Start Guide
• 1x PIEPS-Sticker
Check that the contents are complete and undamaged after unpacking. If necessary, contact your point of sale
or our support team. Please recycle the packaging materials in an environmentally friendly manner (paper to
paper, plastic to plastic, etc.).
Risk of damages due to inefficient packaging at transport.
It is recommended to keep the packaging after unpacking and keep it to use it in case of
warranty issues.
4. GENERAL DESCRIPTION
4.1 STRUCTURE
(1A) LCD display (backlight)
(1B) Slider OFF/SEND/SEARCH
(1C) Slider lock
(1D) Button MARK
(1E) Button SCAN*
(1F) Speaker
(1G) Transmit control LED
(1H) Battery compartment
(2A) Direction indication
(2B) Distance indication
(2C) Transmit symbol
(2D) Battery capacity/type
(2E) MARK (marking possible)
(2F) Active transmitting antenna
(2G) Number of burials (1-3)
(2H) Number of burials (4 or
more)
(2J) Transmitter marked
(2K) Bluetooth active
(2L) Inclinometer mode*
(2M) TX600 mode*
(2N) SCAN mode*
(2P) Analog mode*
(2Q) Meter symbol for SCAN /analog
mode*
* PIEPS PRO BT only