Manual PIEPS PRO BT/POWDER BT | Firmware v3.0 | 02/2023
4 / 28
1.1 MARKINGS
In accordance with applicable regulations, the following marks may be found on the PIEPS beacon or/and on the
packaging:
CE mark of conformity: indicating the fulfillment of relevant EU directives. See Chapter 7.
Conformity.
UKCA mark of conformity indicates fulfillment of relevant UK directives. See Chapter 7.
Conformity
Mark of conformity that indicates compliance with New Zealand requirements
Dustbin symbol: advising users to dispose of waste electrical and electronic equipment
separately from unsorted municipal waste.
FCC ID: indicating the compliance with Part 15 of the FCC Rules.
IC ID: indicating the compliance with Industry Canada’s license-exempt RSS standard(s).
Bluetooth® logo: The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Pieps GmbH is under license. Other trademarks
and trade names are those of their respective owners.
12 digit serial number: identifying the device and is used for device registration.
Battery symbol: indicating battery type and correct position.
Instruction pictogram: advising users to read the instructions and warnings.
Example of the model name.
1.2 LIABILITY
The information contained in this operating manual describes but does not guarantee the features of the
product.
No liability is accepted for damage caused by:
• improper use,
• failure to follow the operating manual,
• unauthorized modifications of the PIEPS beacon,
• improper work on and with the PIEPS beacon,
• continuing to use the PIEPS beacon despite evidence of wear and tear,
• unauthorized, improperly carried out repairs,
• emergencies, external influences or force majeure.
To Next Page
Loading...
Need help?
General
