Manual PIEPS PRO BT/POWDER BT | Firmware v3.0 | 02/2023
8 / 28
Risk of device loss due to incorrect carrying.
Always carry the device in the included carrying system! Always leave the device cord-
secured!
Risk of a not transmitting device due to enabled Bluetooth
The Bluetooth mode is supposed for device management and training mode only! Never use
the Bluetooth mode in avalanche terrain!
Risk of device loss during slope angle measurement
Although the PIEPS PRO BT keeps transmitting while the inclinometer is active, the function
should only be used for training reasons. Never use the inclinometer function in avalanche
terrain!
Risk of battery explosion due to improper battery types or damaged batteries.
Risk of incorrect battery capacity reading due to improper battery types.
Only use batteries of type “Alkaline (AAA) LR03 1.5 V or 3x Lithium (AAA) FR03 1.5V“!
Never use damaged batteries! The use of Lithium batteries must be confirmed in the PIEPS
APP!
Risk of hearing damage due to the high noise level
Never hold the device directly next to your ear! A minimum distance of 50 cm is recommended.
Risk of pinching
Be aware of pinching risk when using the switch!
Risk of device malfunction or damage due to extreme temperatures
Do not expose the device to extreme temperatures outside of the operating limits! Store the
device protected from direct sunlight! Extreme temperatures can result in malfunction or
damage.
Risk of damages due to inefficient packaging at transport.
It is recommended to keep the packaging after unpacking and keep it to use it in case of warranty
issues.
The user must read the operating manual!