Pilz P2HZ X1 - Technical Details: Models 774434, 774435, 774438; General and Electrical Specifications

P2HZ X1
Operating Manual P2HZ X1
20124-EN-09
| 20
Where standards are undated, the 2022-09 latest editions shall apply.
Technical Details Order No. 774434, 774435, 774438
General 774434 774435 774438
Certifications
CCC, CE, EAC, TÜV,
UKCA, cULus Listed
CCC, CE, EAC, TÜV,
UKCA, cULus Listed
CCC, CE, EAC, TÜV,
UKCA, cULus Listed
Electrical data 774434 774435 774438
Supply voltage
Voltage 110 V 115 V 230 V
Kind AC AC AC
Voltage tolerance -15 %/+10 % -15 %/+10 % -15 %/+10 %
Output of external
power supply (AC) 6 VA 6 VA 6 VA
Frequency range AC 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Duty cycle 100 % 100 % 100 %
Current at
N/O contact 30 mA 30 mA 30 mA
N/C contact 20 mA 20 mA 20 mA
Max. overall cable resist-
ance Rlmax per input cir-
cuit 14 Ohm 14 Ohm 14 Ohm
External unit fuse protec-
tion F1 min. 1 A 1 A 1 A
External unit fuse protec-
tion F1 max.
Max. conductor cross
section
Max. conductor cross
section
Max. conductor cross
section
Two-hand control relay
type
in accordance with the
standard EN ISO 13851 EN ISO 13851 EN ISO 13851
Type III C III C III C
Inputs 774434 774435 774438
Quantity 2 2 2
Voltage at
Input circuit DC 24 V 24 V 24 V
Feedback loop DC 24 V 24 V 24 V
Current at
Feedback loop DC 45 mA 45 mA 45 mA
Semiconductor outputs 774434 774435 774438
Quantity 2 2 2
Voltage 24 V 24 V 24 V
Current 20 mA 20 mA 20 mA
External supply voltage 24 V 24 V 24 V
Voltage tolerance -15 %/+10 % -15 %/+10 % -15 %/+10 %
Residual current at "0"
signal 0,1 mA 0,1 mA 0,1 mA
Max. internal voltage drop 4 V 4 V 4 V