Pilz P2HZ X1 - Timing, Environmental, and Mechanical Data

P2HZ X1
Operating Manual P2HZ X1
20124-EN-09
| 22
Relay outputs 774434 774435 774438
Utilisation category of
auxiliary contacts
AC15 at 230 V 230 V 230 V
Max. current 2 A 2 A 2 A
DC13 (6 cycles/min) at 24 V 24 V 24 V
Max. current 1,5 A 1,5 A 1,5 A
Utilisation category in ac-
cordance with UL
Voltage 240 V AC G. P. 240 V AC G. P. 240 V AC G. P.
with current 5 A 5 A 5 A
Voltage 24 V DC Resistive 24 V DC Resistive 24 V DC Resistive
with current 5 A 5 A 5 A
Pilot Duty C300, R300 C300, R300 C300, R300
External contact fuse pro-
tection, safety contacts
in accordance with the
standard EN 60947-5-1 EN 60947-5-1 EN 60947-5-1
Max. melting integral 240 A²s 240 A²s 240 A²s
Blow-out fuse, quick 6 A 6 A 6 A
Blow-out fuse, slow 4 A 4 A 4 A
Blow-out fuse, gG 6 A 6 A 6 A
Circuit breaker 24V
AC/DC, characteristic
B/C 4 A 4 A 4 A
External contact fuse pro-
tection, auxiliary contacts
Max. melting integral 240 A²s 240 A²s 240 A²s
Blow-out fuse, quick 4 A 4 A 4 A
Blow-out fuse, slow 2 A 2 A 2 A
Blow-out fuse, gG 4 A 4 A 4 A
Circuit breaker, 24
VAC/DC, character-
istic B/C 2 A 2 A 2 A
Conventional thermal cur-
rent 5 A 5 A 5 A
Contact material AgSnO2 + 0,2 µm Au AgSnO2 + 0,2 µm Au AgSnO2 + 0,2 µm Au
Times 774434 774435 774438
Delay-on de-energisation
(response time tA in ac-
cordance with EN ISO
13851)
N/O contact 15 ms 15 ms 15 ms
N/C contact 30 ms 30 ms 30 ms
Recovery time 250 ms 250 ms 250 ms
Simultaneity, channel 1
and 2 max. 500 ms 500 ms 500 ms
Environmental data 774434 774435 774438
Climatic suitability EN 60068-2-78 EN 60068-2-78 EN 60068-2-78