Pilz PDP67 F 4 code - Installation; General Installation Guidelines; Module Dimensions and Mounting

Installation
Operating Manual PDP67 F 4 code
1001531-EN-06
12
5 Installation
5.1 General installation guidelines
The product must be fastened to a flat mounting surface, so that there is no strain on the
housing when the module is screwed down. The mounting distances will depend on which
plug-in connectors are used and on the bending radius of the cables.
Unused connectors should be sealed using blind plugs.
To install the system, proceed as follows:
} Fit 2 x M4 internal threads on the mounting surface.
} Use two fixing screws to attach the product to the mounting plate.
5.1.1 Dimensions
60
4,3
123
133
4,3
22,1
5,6